DHS Z-Wave Smoke Sensor
SKU:
DHS-SNS-SM-DHS
A$140.00
A$126.00
A$126.00
Quick Overview
The DHS Smoke Sensor is a battery operated Z-Wave ionisation smoke detector. Smoke detection is signaled through siren and LED diode. Additionally, the smoke sensor signal can be sent via Z-Wave gateway to authorised user's smartphones or tablets. The DHS Smoke Sensor is designed to be placed on a ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor). Beeping signal warns when the battery needs replacing.
Please note that this smoke sensor can be used only as an auxiliary detector. To fulfil Australian regulation you have to have installed in your dwelling other fully certified in Australia smoke sensors, as a primary smoke detectors. Our Z-Wave smoke sensor can be used only as an additional detector linked to your home automation system. Its Australian certification is pending.
Product Details
Product Support
Manuals:
⇒ DHS Z-Wave Smoke Sensor Manual (Size: 174KB)
Technical Specifications
RF protocol
Z-Wave (binary sensor)
Battery TypeOne battery 9V
Operation Rangeup to 30m without obstacles
Radio frequency921.42 MHz (AU/NZ Z-Wave)
Operation temperature0 - 50C
ApplicationIndoor use only
Weight90g
HousingABS
Size (Diameter)65 x 28 mm
The DHS Smoke Sensor is a battery operated Z-Wave ionisation smoke detector. Smoke detection is signaled through siren and LED diode. Additionally, the smoke sensor signal can be sent via Z-Wave gateway to authorised user's smartphones or tablets. The DHS Smoke Sensor is designed to be placed on a ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor). Beeping signal warns when the battery needs replacing.
Please note that this smoke sensor can be used only as an auxiliary detector. To fulfil Australian regulation you have to have installed in your dwelling other fully certified in Australia smoke sensors, as a primary smoke detectors. Our Z-Wave smoke sensor can be used only as an additional detector linked to your home automation system. Its Australian certification is pending.
Product Details
- Compatible with certified Z-Wave controllers in Australian version (921.42MHz) including: Vera 3 / Lite UI7 and Fibaro HC2 / Lite.
- Extremely easy installation - simply install it in location prone to fire.
- Powered with one 9V battery (not included).
- Alarm is signaled by loud 85db sound and LED diode.
- Hinged cover for easy battery replacement.
- Manual test functionality.
- NWI automated inclusion functionality.
Product Support
Manuals:
⇒ DHS Z-Wave Smoke Sensor Manual (Size: 174KB)
Technical Specifications
RF protocol
Z-Wave (binary sensor)
Battery TypeOne battery 9V
Operation Rangeup to 30m without obstacles
Radio frequency921.42 MHz (AU/NZ Z-Wave)
Operation temperature0 - 50C
ApplicationIndoor use only
Weight90g
HousingABS
Size (Diameter)65 x 28 mm